Bareco Safety clutches are designed to slip and avoid damage to driveshaft or gearbox when slashers or other farm machines are in operation.Before use compress springs fully and then back off 2 turns. Different types of clutches are available to suit different horsepower requirements.Scroll down from the first part number shown above to view all the different horsepower ratings available.Spare parts available on request

Drive Shaft Series identification by Universal Joint and Yoke size as listed below.

Measure the cap dimensions and yoke O.D. from ear to ear to confirm your selection of the correct clutch for your drive shaft.

Series 4 Cap O.D. A =27mm  Cap to Cap O.D. B =74.6mm. Yoke O.D. 83mm

Series 6 Cap O.D. A =30.22mm Cap to Cap O.D B.=92mm. Yoke O.D. 101mm

Series W2400/P400 Cap O.D.  A =32mm Cap to Cap O.D. B=76mm. Yoke O.D. 86mm

Series 8 Cap O.D. A =35mm Cap to Cap O.D B =106.5mm. Yoke O.D. 125mm

Series W2600/P600 Cap O.D. A =42mm Cap to Cap O.D.= B 104mm. Yoke O.D. 115mm

See universal joint dimensions example shown below.

Contact us for any extra information you may need regarding these clutches.Universal joint measurement example only